Wednesday, February 16, 2011

My Kinda Purse-onality :)

What you'll need: 
>Fabric Ribbon (black)
>Navy Blue Buttons
>Needle and black thread
>Scissors
>Heat N Bond (spray bottle with water and Iron)
>Kinda plain Purse




 I got this purse from Walmart for 9.00 on clearance- Reg:12.00
And wanted to show those of you who are creative great bargainers how you can create a truly cute/unique style purse on a budget 
: ) (but even if you are not on a budget it always feels nice to save money) 


 I bought some very inexpensive Fabric ribbon for 1.98 
Measure your fabric ribbon to your purse, side to side, leaving 1/4 inch on each side for a clean tucked edge.  
Find your desired placement and line the back with: Heat N Bond
[Heat N Bond is Ultra hold Iron-On adheisve is a paper backled sheet of solid heat activated adhesive. It uses a low temperature & short pressing time so it allows for a wider range of materials that can be bonded. Use with fabric, foil, lame, denim, felt, suede, leather, wood and cardboard. Machine washable. There is no steam or pressing cloth needed. It will not lift or pucker after washing. It's no-sew bond is three times stronger than any other traditional fusible web. and is about 1.50 in stores]


Measure it to your purse, folding the ends underneath and follow Heat N bond Instructions


Next Iron on as directed...


Take your buttons, (I chose a dark blue I got from Walmart for 1.48)establish where you would like the buttons to be placed- 
Now get your needle and thread ready for some quick hand sewing, I chose to lay them side by side vertically but you can place them wherever you like : )


Next sew your buttons in place starting from the inside-out to hide the knot


Now the last easy step is to just take your same needle and thread and sew the ends of your fabric stripes inward(just to assure a really tight hold)


And now you are finished-






Enjoy your purse and wear it with style- it's all your own : )
I love this one <3

Thursday, February 10, 2011

Super Cute freezer bag art Tee

What you will need:
>Freezer bag paper
>X-acto Knife
>Fabric paint (color of your choice)
>Iron
>Scissors
>Pen
>Sponge
>T-shirt
Take your plain t-shirt(pocket free)-(I bought mine from Walmart they were 4 for 7$)
 Cut the tips of the sleeves off (just to the desired length) and trim off collar -kind of at an angle (for this will be a one sided shoulder revealing style shirt) You may want to put on the shirt and then mark where you want the shoulder to fall before cutting. (Remember: you can always take more off, but putting it back on is not so simple)
Take your freezer paper and draw what you want on your shirt (matte side of the freezer paper UP- Glossy side DOWN)


when you are finished you will need to take your X-acto knife and cut out your design (keep in mind that you will be blotting this design with paint so the only part of the design that will show, is the empty areas- Try to think of your stencil the middle part as the wrapper and the outside of the stencil is your desired candy :)
(you might want to place something under the paper so you don't cut up your table, floor etc)


When you are done,find your desired placement for your design on your t-shirt and iron -matte side up- paper onto your shirt with a low setting and(steam free) for about 30 secs
When you are finished the paper should be flat to the shirt without any lifting areas.
Take your paint(color of choice)& sponge an blot over the open areas of your design till coated evenly (you may want to put a piece of cardboard in between the inside of the shirt to avoid getting paint on the other side of your t-shirt)
When paint is near dry or completely dry, peel off freezer paper to reveal your awesome new Tee and design- 
Yup No joke, you are done! : D Now wear it with style- after all you made it, and what's cooler then that?! Really!





Wednesday, February 9, 2011

Trendy Freezer Bag Hat

I bought a 50 cent plain black hat from Walmart, took a piece of freezer bag square and cut it into strips, placed the strips in a plaid like positioning and ironed onto the hat (matte side up) for about 30 secs. Do not remove strips yet
Take some fabric paint (color of your choice, I chose blue) and a sponge and blot over freezer bag strips coating evenly through all the open holes.

when the paint is dry or near dry, peal off freezer bag strips revealing your lovely pattern : )
Now take some of your yellow paint (or whatever color you choose) and paint additional designs between the empty black lines, (I chose x's)


Now take some fabric, I chose flannel type blue and black plaid and ripped them into strips about 2 1/2- 3 inches long, (I first cut a small piece about 1/2 inch and then ripped the rest of the way down for a grundgy effect)

place them in a star like pattern such as this- and sew them, together in the middle then sew onto right side of hat (I would suggest putting the hat on and marking with tape where you want the flower to be placed, so it doesn't end up in a funky spot)
And now you are done : ) Enjoy your lovely fashionable (and quite the inexpensive) Trendy hat! (Oh yes, btw I chose to take the front of the hat - the lid- and sew it upward cause I thought it added some extra cuteness to the look, but it's completely your choice)







Voila! Your lookin Fabulous : D hehe